Matthew Smith wrote: > Hi > > Does anyone have one of these or is able to identify it? > > This module looks very much like an ACE unit and indeed the eBay > vendor's link to documentation is to an ACE II. > > However, the ACE units have a 90 degree SMA antenna connector whereas > this unit has a vertical, unthreaded connector od=4.97mm. > > Typically, searching for this number on the Trimble site comes up with > nothing, nor the PII-M1 or 9923A printed on the PCB. > > The second mystery is that the supplied antenna, a 40767-40 has another > connector that I cannot identify. The specification for this antenna > says that it has an SMA connector. Once again, what is on the end of > the cable is something else. > > There is a fly-lead to connect the board to the antenna - different > connectors on both ends, none threaded. > > What I really want to know, more than anything, is what these connectors > are so that I can get adapters for my cable extension. > > Or should I just chop the ends off the antenna cable and fly lead and > chuck on something a bit more standard like a BNC connector? > > Cheers > > M > > Mathew
Some pictures of the connectors in question would be useful. Bruce _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.