Quoth Brian Kirby at 2008-03-08 14:46... > Attached is a interface for an Oncore VP receiver. You will have to > check - I believe the GT and UT use the same connections as the VP.
Thanks Brian - that's pretty close to what I've come up with apart from the fact that I'm putting isolation (TI ISO7231) between the receiver and the rest of the circuit and the receiver is powered by a MeanWell high-isolation DC/DC convertor. And I've got mine running right to left ;-) I've got a something very similar drawn up for my Trimble modules except that the isolation and level conversion is x2, for the two serial ports. Cheers M -- Matthew Smith Smiffytech - Technology Consulting & Web Application Development Business: http://www.smiffytech.com/ Personal: http://www.smiffysplace.com/ LinkedIn: http://www.linkedin.com/in/smiffy _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.