Hi Jeff-

I have only used SatStat with my Z3801A, and it did take a while to get it set 
up right under XP.  I much prefer Tboltmon for the Thunderbolt.  Now that both 
are functional, I can start playing with them.

I found that the Z3801A with the std HP antenna and recommended cable didn't 
work very well with the antenna in the garage (no plywood, 1x6s and 3 layers of 
asphalt shingles), it took forever to acquire sats and would lose the lock at 
the drop of a hat.  It had to go out in the weather to be stable.  On the other 
hand, the Thunderbolt antenna is in the corner of the garage, tilted at an 
angle, with hanging bicycles on one side and 19" racks on another, and is happy 
as a clam.  

Are clams happy?  I've always wondered about that saying...

-Dave

-------------- Original message -------------- 
From: "jshank" <[EMAIL PROTECTED]> 

> There appears to be three software-monitoring programs available, GPSCon 
> Pro, GPS Control & SatStat. I was just curious about what the group thinks 
> of these three programs or if there are any other available. 
> 
> 
> 
> The Z3801A manual suggest rg-213 of lmr-400. I have neither on hand but am 
> not apposed to purchasing either. 
> 
> I do have rg58/u and coax CATV cable on hand but the problem is that it is a 
> difficult process to run the cable from my basement lab to the second floor 
> attic and I only o want to do it once. Originally, I was going to penetrate 
> the roof at the ridgeline and install the antenna on a one foot but I 
> understand it is possible to receive singles from under the plywood/asphalt 
> shingle roof. Is it worth a penetration of the roof? 
> 
> 
> 
> Jeff 
> _______________________________________________ 
> time-nuts mailing list -- time-nuts@febo.com 
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts 
> and follow the instructions there. 
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to