I hope this post is considered appropriate, if not please let me know and accept my advance apologies. I have several NI PCI GPIB cards that are surplus to my requirements. I was intending to put them on Ebay but thought I would offer them here first. These are the older style and were removed from working test setups. All are in excellent condition and have been tested using NI 488-2 software to control an HP3336A signal generator. I will send them anywhere at a fixed price of £80, eighty pounds, each with the buyer also to pay for insured postage. Paypal payment would probably be easiest although I'm happy to discuss alternatives but can only accept payment in British pounds. Please contact me off list if interested. Just in case anyone's wondering, all these worked first time with no problems and are not the cards I referred to recently that had the onboard oscillator partially unsoldered:-) However, those are also working fine too and I'm planning to use them myself but might be tempted to part with at least a couple if there's sufficient demand. Because of the size of the oscillator package and the very fine soldering used this does seem to be a general potential weakness on these boards and I would recommend anyway that the oscillator is always resoldered. I would be happy to do this and retest if requested. regards Nigel GM8PZR
_______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.