Bruce Many thanks for your advice on the "Roll-over Factor", I will attempt this as soon as I'm back in working condition !. You never know when the hit will take place - shortly after making my claim to fame with Odetics 325 - the whole system shut down !! It would appear to be a SWMP Supply problem - I gather this is a regular fault with this item (it had been sitting on a shelf for the past 5 years!). I will make my way into this box tomorrow, but fixing faults with this type of PSU are not as easy as a good old linear type.
regards Roy ----- Original Message ----- From: "Bruce Lane" <[EMAIL PROTECTED]> To: <time-nuts@febo.com> Sent: Friday, April 18, 2008 2:41 PM Subject: Re: [time-nuts] week 1024 roll over > Hi, gang, > > *********** REPLY SEPARATOR *********** > > On 18-Apr-08 at 09:32 Roy Phillips wrote: > >>Glenn >>Interesting to hear your problems with the Datum - I have the same problem >>with an Odetics 325 - my date is the same , currently Sept 02,1988, but I >>am >>pleased to tell you that it has no effect on the performance of the >>equipment. I have the correct time and a GDOP of 1.8 and TFOM=4 . > > <snippage> > > Roy, I don't know which receiver you have in there, but I do happen to > have late-issue firmware for the 325 that converts it to a 425. It may or > may not help with the date problem. > > If you have the capability to program EPROM chips, and a few blank parts, > you can grab the archive from my FTP site as follows. > > Site & port: ftp.bluefeathertech.com, use port 50021 instead of the > default 21. > > Login: Use the login name ftp and whatever password you want (though I > prefer an E-mail address for logging purposes). > > Path: /electronics/radio/GPS/clocks/Odetics/firmware > > You will also find, in that same general area, a .PDF copy of the manual > supplement for update. > > Happy tweaking. > > > -=-=-=-=-=-=-=-=-=-=-=- > Bruce Lane, Owner & Head Hardware Heavy, > Blue Feather Technologies -- http://www.bluefeathertech.com > kyrrin (at) bluefeathertech do/t c=o=m > "Quid Malmborg in Plano..." > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.