In a message dated 23/05/2008 20:13:37 GMT Daylight Time, [EMAIL PROTECTED] writes:
reply: -361, "Parity error in program message: The clock seems to work, but I cannot get the Status window to show anything. It just cycles between ..."requesting data" and ..."communicating"... I set the parity to Odd as the manual says. The Z3801A GPS Lock LED is lit and the output looks stable. ---------------------- It's a while since I used SatStat, so can't remember the exact messages now, but that does seem reminiscent of the "fun" I had when trying to talk to the Z3801 via an RS422 interface card. That was before I gave up and performed the necessary surgery for the RS232 conversion, after which it was all plain sailing. The Z3801A doesn't need to be able to talk to the software in order to acquire lock and condition the oscillator. regards Nigel GM8PZR _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
