They probably spent most of their life outside. The air pollution over there is horrible !!
73, Dick, W1KSZ -----Original Message----- >From: wje <[EMAIL PROTECTED]> >Sent: Jul 19, 2008 2:33 PM >To: Discussion of precise time and frequency measurement <time-nuts@febo.com> >Subject: Re: [time-nuts] Double ovened 10811-60158 on ebay > > I got one without the outer cover, which isn't quite as useful. I > removed all the junk to get down to the orginal non-double-ovened osc. > One thing I noticed - I wonder where these were actually deployed? The > 10811B itself has a fair amount of corrosion on it, lots of pitting. It > still works fine, though. > Another thing, the 10811B in mine doesn't have a removable endplate, > it's soldered. This makes it a lot more difficult to adjust or repair. > Still, I think it's a fine buy for the cost. Now all I have to do is > figure out what I really want to do with it. :) >Bill Ezell >---------- >They said 'Windows or better' >so I used Linux. > > Angus wrote: > >I see that the same vendor has a few more units for sale. He has also >included a picture that labels all the connections. > > > >At least they look to be complete with their outer covers now, which >would be useful if anyone did want to add some temp control. > >Seeing all those oscillators does make me wonder what they came from - >a heap of working 58503's going to landfill is close to sacrilege :-) > >Angus. > > >On Sat, 12 Jul 2008 11:20:57 -0600, you wrote: > > > >Message: 2 >Date: Wed, 9 Jul 2008 12:10:52 +1000 >From: "Jim Palfreyman" [1]<[EMAIL PROTECTED]> >Subject: [time-nuts] Double ovened 10811-60158 on ebay >To: [EMAIL PROTECTED] >Message-ID: > [3]<[EMAIL PROTECTED]> >Content-Type: text/plain; charset=ISO-8859-1 > >Sorry to pollute the list but some people here may be interested and I think >this might be a good buy. > >Ebay item 250268030266 a bunch of 10811-60158 wrapped up in a second oven >that have been pulled from a bunch of HP 58503A. > >There are 21 units available at US$50 Buy It Now. Postage seems reasonable >too. > >I've bought one and so if anyone knows where I can get the cabling >requirements please let me know. > > >Regards, > >Jim Palfreyman > > >_______________________________________________ >time-nuts mailing list -- [EMAIL PROTECTED] >To unsubscribe, go to >[5]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. > > >_______________________________________________ >time-nuts mailing list -- [EMAIL PROTECTED] >To unsubscribe, go to >[7]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. > >References > > 1. mailto:[EMAIL PROTECTED] > 2. mailto:time-nuts@febo.com > 3. mailto:[EMAIL PROTECTED] > 4. mailto:time-nuts@febo.com > 5. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > 6. mailto:time-nuts@febo.com > 7. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >_______________________________________________ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.