When I get my Tbolt, I was planning to program a PIC18F6722-based board I have already designed and produced, into the role of passthru/monitor to indicate lock. What other features would everyone want to see on a Tbolt monitor board relative to features/displays? What kit price range would you consider workable? I already have some similar RS-232 supervisory stuff programmed in Assembler for the board similar to what a Tbolt supervisor would probably have. The board supports discrete LEDs as well as the usual parallel LCD character display--currently a 20X4 matrix available from numerous sources like Crystalfontz and others. The board is based on +5 volts.
If there was enough interest in a board, I probably would port the code to a smaller 18FxxKxx-series processor, as the price of the 6722 has gone through the roof and about 90 percent of the code space is unused. The K-series in SOIC-28 is also much easier to hand solder! I'd just have to work out a negative LCD bias supply as the K runs on 3.6 volts maximum. I wouldn't mind releasing the source code I've written too, if that made things more customizable. The Assembler is free from Microchip. I'm a bit busy at the moment, but could tend to customizations in November/December (depends somewhat on when my Tbolt arrives!). Scale of production greatly affects the cost, tho. -Dave Medin __________________________________________________________________ Are you a Techie? Get Your Free Tech Email Address Now! Visit http://www.TechEmail.com _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.