In message <[EMAIL PROTECTED]>, "Jim Palfreyman" writes: >Do I run each 8 ohm speaker on its own 500W channel? > >or > >Do I run in bridged mode and put the two speakers in parallel onto the 1000W >amplifier?
Unless the two speakers are _very_ identical, including length and type of cabling from the amplifier, I will recommend against running them in parallel. As former sound technician I will also say this: run them on separate channels, if you loose one channel, you don't loose your sound entirely. -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 [EMAIL PROTECTED] | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.