Hi Tom, all, Sorry, the D-5 is a rectangular solid, 4"x4"x7", quite featureless except for the nameplate on the top and the connection pins, circular ~14pin, octal size (possibly a valve - sorry, 'tube' - base, on the bottom. I will try to get a couple of pictures off to the group within the next few days. I have a 5.0C like the one in the reference - a very nice performing unit, compares nicely with homebuilt GPSDO and off-air MSF standards. When the 'D' model was offered by a friend I snapped it up - anything by Sulzer was good! Apologies for the 'legalese' fluff that appears at the end - my employers apparently have several lawyers with nothing important to do........
regards, Paul G8GJA -----Original Message----- From: Tom Van Baak [mailto:[EMAIL PROTECTED] Sent: 10 October 2008 15:17 To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Sulzer Labs D-5 oscillator > Hi all, > > I need a bit of help getting an old Sulzer D-5 5MHz oscillator to work. It > was built into a rack module with monitoring facilities and had been > slightly 'got-at' by the previous owner. Some of the connections were > pencilled on the case but not enough to give confidence about powering it > up. Has anybody got any information on this 'classic' design? Pin connection > data would be a great help, anything more would be wonderful!! > > Thanks in advance, > > Paul Reeves, G8GJA Does it look like either of these? http://leapsecond.com/museum/sul25-1/ http://leapsecond.com/museum/sul25-2/ /tvb _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. This email, including any attachment, is a confidential communication intended solely for the use of the individual or entity to whom it is addressed. It contains information which is private and may be proprietary or covered by legal professional privilege. If you have received this email in error, please notify the sender upon receipt, and immediately delete it from your system. Anything contained in this email that is not connected with the businesses of this company is neither endorsed by nor is the liability of this company. Whilst we have taken reasonable precautions to ensure that any attachment to this email has been swept for viruses, we cannot accept liability for any damage sustained as a result of software viruses, and would advise that you carry out your own virus checks before opening any attachment. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.