WarrenS wrote: > Bruce > > My Oncore's phase is definitely different on each 100Hz cycle. A digital > storage scope shows it very well. > > Some things that come to mine: > > 1) Not all Oncores are the same, mine is an old 8 channel one. (Don't > remember the number, it is the one with the sawtooth capability) > 2) The actual error amount is updated each 1 sec and the processors still > dithers that to get the 100 Hz to be close to the correct value > 3) Other TBD > > Warren > ******************* > > Warren
This raises some questions on the interpreatation of the M12+T and Jupiter-T receiver specs. Some measurements are required in order to settle the questions once and for all. Can anyone that has either or both of these receivers make the required measurements? I have both receivers, but no way of making the required measurements (timestamping the leading edge transitions of the 100Hz or 10kHz edges using a digital scope or other means). Bruce _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
