Mark Sims skrev: > Hello again Magnus, Hi Mark,
> If the program is started up and it is not seeing the Tbolt on the COM > port you should see the "Log: OFF" indicator, two lines of text that > are the plot area header, and the plot axes/grid. Pressing the > SPACE bar should bring up a help screen in place of the plot grid. > If all that is working, the problem is probably in the COM port. > It wants the tbolt to be at factory com settings (9600,N,8,1) That was not the problem. It failed with a big windows thing saying it would not find the COM1 and then the programmed died. > The program talks to the COM port UART directly. It probably won't > work with a USB converter. The default is COM1, the /2 command line > option should select COM2 (but I don't have a machine here with two > serial ports to test it... the com port code was lifted from another > program that did work with COM2). The trouble here was that COM1 was "felt" by the OS to be used for something else. Very strange. I had to force COM2 to become COM1 to solve it. /2 did not help as it actually was COM1 in hardware. > There are several command line options. use /? to see them. I found them by tossing random commands at it... fairly quickly. My remaining problem is to get it to run in graphical mode. Cheers, Magnus _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.