Sure. I didn't write down the numbers because it was an interim step, but I earlier did that and IIRC the std dev was around 20-25 ps.
Would error in the cal circuit tend to falsely increase, or decrease, the result? Or both? John ---- Poul-Henning Kamp said the following on 04/04/2009 03:08 AM: > In message <49d68734.3020...@febo.com>, John Ackermann N8UR writes: > >> A single 10 MHz source was daisy-chained to the TADD-2 input, to the >> 5370B external reference input, > > Can you do the test again running the 5370B on a different clock or > free-running ? > > Running synchronized clocks like you do makes the calibration of > the input circuits in the 5370B very very critical for the measured > value. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.