> Wonder too just how accurate it is, using a USB based (non PPS) GPS? The picture looked like a GlobalSat BU-353. I guess you could build a NTP server out one, but I wouldn't expect time-nuts quality.
I've been looking for low cost GPS units that work well with NTP. I haven't found much. USB has a bad reputation for timing because it's polled, but that polling is done in hardware on the order of a ms. You can sanity check things by feeding a GPS with a serial connection to both a normal serial port and a RS-232 to USB gizmo. http://www.megapathdsl.net/~hmurray/ntp/GPS18LVC-usb-off.gif I think this says that USB works reasonably well and my kernel/whatever isn't getting the low-latency stuff right. The old non-x Garmin GPS-18-USB was pretty good. http://www.megapathdsl.net/~hmurray/ntp/GPS18USB-off.gif The 18-x is pretty bad. http://www.megapathdsl.net/~hmurray/ntp/GPS18LVCx-off.gif Most of the low cost USB units seem to use the SiRF chip sets. They are horrible for timing. http://www.megapathdsl.net/~hmurray/ntp/GPSSiRF-off.gif If anybody figures out how to get reasonable timing out of one of these things, please clue me in. -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
