There are two units now listed on the "evil empire", but it is not clear what is in them. At least I cannot fathom it.
73, Dick, W1KSZ -----Original Message----- >From: "Lux, James P (337C)" <james.p....@jpl.nasa.gov> >Sent: Jul 28, 2009 6:08 AM >To: Discussion of precise time and frequency measurement <time-nuts@febo.com> >Subject: Re: [time-nuts] What's the cleanest way to produce 1 and 5 MHz from10 >MHz? > > > > >On 7/28/09 4:47 AM, "J. L. Trantham" <jlt...@worldnet.att.net> wrote: > >> If you want a 'vintage' solution, the HP 5087A can be configured to take a >> single 5 or 10 MHz and divide/multiply it to 10 MHz, 5 MHz, 1 MHz and even >> 0.1 MHz then feed that to various output amplifiers of 10, 5, 1 or 0.1 for >> up to 12 total outputs of your configuration. However, you might be looking >> for a long time to find all the right cards. >> >> Joe >> > >Symmetricom sells a box that does the same, oddly called the 5087B. Yes, >almost certainly a few kilobucks. And I don't think it will do any rate >changes. > > >_______________________________________________ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.