Rex wrote:
Richard W. Solomon wrote:
Anyone know where I can get a "C" or "D" size schematic of the E1938A?
One that I can read !!
73, Dick, W1KSZ
I assume you have the pdf schematic that Rick K shared with us a while
ago. There's plenty of detail in there, you just can't see it if you
print the whole thing to one letter-sized page. One option is to take
the file to a copy place like Kinkos (or what ever they are called
now) and have them print it on bigger paper.
Or, on your own, you can try this... (your mileage may vary depending
on OS, tools, or printer driver.) Open the file in Adobe reader. On
the size-percentage at the top, set it to 100% or 125%. Scroll to the
upper left corner of the schematic on your screen. Send it to the
printer. When I do this my printer driver window opens. Change the
Print Range to 'Current View' so you're just printing the section you
were viewing. You may need to change to Landscape mode for best fit -
for me this is buried in Properties. I changed Page Scaling to 'Fit to
Printer Margins' to best fill the page. You probably want that or Normal.
Print it. If it is readable, your are close, if not, go back to Adobe
and increase the % setting. When you can read the section on the
printed version ok, print the whole schematic by scrolling the view in
Adobe and printing it in sections. If you keep the % setting the same
in reader between pages they should match. Get some scissors and tape
and put the pieces together.
Not pretty, but I've done it before to get something I can work with.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
In Acrobat you should also have a "tile" command in the print/setup
windows where you can spread a page print across four pages. Then you
can manually cut and paste the print outs to get a larger view.
Brian - KD4FM
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
