********************************************************************* * * The X-server can not be started on display lahpice:0 ... * *********************************************************************
It is trying to connect to a Xserver with the name lahpice Is this the host name of your LA ? If not, I don't know where you change it (My 16702A is still waiting for me to get back to fixing the settings for the internal display) It may be a good idea to just reload everything from the CD. For a SCSI CDROM, look for Apple Mac and SUN externals. -pete > Apologies for the somewhat off topic post, but some folks here may be > able to assist... > > I have a HP 16700A logic analyzer that I'm trying to troubleshoot. I > can get access to the console via the serial port, and I can see that > it boots up normally, except that it fails to start the X server, and > drops to a login prompt for which I have no credentials. > > The complete boot dump from the serial console is posted at the end of > the email. > > I have a keyboard and mouse plugged in. I have the service manual, but > it basically says to either re-install the OS or replace the CPU > board. Nothing about the different operating states, logins, etc. > > The monitor connected to the VGA port displays 8 yellow boxes across > the bottom of the screen once the boot process starts. They say: > > [empty] > [empty] > [empty] > [REMOTE MODE *] > [empty] > [empty] > [DISPLAY FUNCTNS] > [AUTO LF] > > It seems like it is failing to find what it needs to start up using > the external monitor (not seeing the keyboard?), and so is defaulting > to the serial console. > > I have the latest software CD from Agilent, but am still searching for > a SCSI CD-ROM to load it with. > > If anybody can shed some light on the issue or suggest troubleshooting > steps, that would be great. I'm in the Seattle area, so any locals > would be welcome for a troubleshooting session. > > Thanks! > > -Pete > > -------------------------------------------------------------------------------------------------------- > > Firmware Version 2.1 > > Duplex Console IO Dependent Code (IODC) revision 1 > > Memory Test/Initialization Completed > > ------------------------------------------------------------------------------ > (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved > ------------------------------------------------------------------------------ > > Processor Speed State Coprocessor State > Cache Size > --------- -------- --------------------- ----------------- > ---------- > 0 150 MHz Active Functional 64 KB > > > Available memory (bytes) : 167772160 > Good memory required (bytes): 167772160 > > Primary boot path: SESCSI.6.0 > Alternate boot path: SESCSI.1.0 > Console path: GRAPHICS(0) > Keyboard path: PS2 > > Processor is starting autoboot process. > > To discontinue, press any key within 2 seconds. > > 2 seconds expired. > Proceeding... > > Trying Primary Boot Path > ------------------------ > > Booting... > Boot IO Dependent Code (IODC) revision 153 > > > HARD Booted. > > ISL Revision A.00.38 OCT 26, 1994 > > ISL booting hpux > > Boot > : disk(8/16/5.6.0.0.0.0.0;0)/stand/vmunix > 3813908 + 323584 + 323200 start 0x196468 > vuseg=1013000 > nfs_init3 added vfs type nfs3 at slot 4 > NOTICE: cachefs_link(): File system was registered at index 5. > NOTICE: autofs_link(): File system was registered at index 6. > inet_clts:ok inet_cots:ok starship_attach: vendor id=103c, device > id=1650 > > System Console is on the Built-In Serial Interface > Networking memory for fragment reassembly is restricted to 14356480 > bytes > Logical volume 64, 0x3 configured as ROOT > Logical volume 64, 0x2 configured as SWAP > Logical volume 64, 0x2 configured as DUMP > Swap device table: (start & size given in 512-byte blocks) > entry 0 - major is 64, minor is 0x2; start = 0, size = 3145728 > Warning: time-of-day register time is out-of-range > > Getting time from file system > Checking root file system. > file system is clean - log replay is not required > Root check done. > Starting the STREAMS daemons. > B2352B HP-UX (B.10.20) #1: Sun Jun 9 08:03:38 PDT 1996 > > Memory Information: > physical page size = 4096 bytes, logical page size = 4096 bytes > Physical: 163840 Kbytes, lockable: 114172 Kbytes, available: > 134048 Kbytes > > /sbin/ioinitrc: > > /sbin/bcheckrc: > Checking for LVM volume groups and Activating (if any exist) > Volume group "/dev/vg00" has been successfully changed. > vxfs fsck: sanity check: root file system OK (mounted read/write) > /sbin/itemap: WARNING: An attempt to write keyboard mapping entries past > /sbin/itemap: the end of the buffer. Further writes will be ignored. > Checking hfs file systems > /sbin/fsclean: /dev/vg00/lvol1 (mounted) ok > HFS file systems are OK, not running fsck > Checking vxfs file systems > /dev/vg00/lvol3 : > vxfs fsck: sanity check: root file system OK (mounted read/write) > /dev/vg00/lvol4 : > vxfs fsck: sanity check: /dev/vg00/lvol4 OK > /dev/vg00/lvol5 : > vxfs fsck: sanity check: /dev/vg00/lvol5 OK > > (c)Copyright 1983-1996 Hewlett-Packard Co., All Rights Reserved. > (c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of > California > (c)Copyright 1980, 1984, 1986 Novell, Inc. > (c)Copyright 1986-1992 Sun Microsystems, Inc. > (c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology > (c)Copyright 1989-1993 The Open Software Foundation, Inc. > (c)Copyright 1986 Digital Equipment Corp. > (c)Copyright 1990 Motorola, Inc. > (c)Copyright 1990, 1991, 1992 Cornell University > (c)Copyright 1989-1991 The University of Maryland > (c)Copyright 1988 Carnegie Mellon University > > RESTRICTED RIGHTS LEGEND > Use, duplication, or disclosure by the U.S. Government is subject to > restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in > Technical Data and Computer Software clause in DFARS 252.227-7013. > > > Hewlett-Packard Company > 3000 Hanover Street > Palo Alto, CA 94304 U.S.A. > > Rights for non-DOD U.S. Government Departments and Agencies are as set > forth in FAR 52.227-19(c)(1,2). > Aug 03 11:08:39 auto_parms >> Checking network status. > 8/16/6 0x001083358ADA 0 UP lan0 DOWN 4 ETHER > Yes 52 > Aug 03 11:08:41 auto_parms >> /sbin/auto_parms, checking network for > DHCP server (see /etc/auto_parms.log) > > Aug 03 11:08:44 auto_parms >> DHCP Client Status: > Aug 03 11:08:44 auto_parms >> DHCP is disabled for: lan0 > i > HP-UX Start-up in progress > __________________________ > > Mount file systems ................................ OK > Setting hostname .................................. OK > Enable auxiliary swap space ....................... OK > Start syncer daemon ............................... OK > Configure LAN interfaces .......................... OK > Check LAN Status .................................. OK > Start Software Distributor agent daemon ........... OK > Configuring all unconfigured software filesets .... OK > List and/or clear temporary files ................. OK > Clean up old log files ............................ OK > Start system message logging daemon ............... OK > Configure HP Ethernet interfaces .................. OK > Configure HP 100BT interfaces ..................... N/A > Configure LAN interfaces .......................... OK > Start NFS core subsystem .......................... OK > Start NFS client subsystem ........................ OK > Start Internet services daemon .................... OK > Cleaning up NIS client subsystem .................. OK > Start NIS client subsystem ........................ OK > Verifying NIS client subsystem .................... OK > Starting kks daemon ............................... OK > Start time synchronization ........................ N/A > Start print spooler ............................... N/A > Start clock daemon ................................ OK > Set X11 Device Configuration ...................... OK > Start the HP SICL subsystem (IPROC) ............... N/A > Start 16610A Processor Run Control daemon ......... OK > Start httpd (Web Server) .......................... OK > Start NFS server subsystem ........................ OK > Start Lmgrd daemon ................................ OK > > The system is ready. > > > ***************************************************************************** > * > * The X-server can not be started on display lahpice:0 ... > * > ***************************************************************************** > > > HP Logic Analysis System > > Please Log in as: <user-name> [displayname:0] > > Console Login: > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
