A colleague of mine brought in a Vectron oscillator. I'm hoping someone can tell me the pinout.
The first two letters on the part number could be CC-, or CO-, or OO- The most probable part number is CO-223A38L2, and it is a 100 MHz oscillator. There is a 7 pin ring connector on the bottom of the can, and an SMA output connector. Can dimensions are about 2.02" x 2.02" x 4.02" and there are 4 threaded posts on the bottom to attach the oscillator to a chassis. Does anyone have a datasheet or a list of the pins? The Vectron site does not go as far back as CO-223. Thanks, JPW John P. Wendler, PE Sr. Principal Engineer Harris Corporation 1011 Pawtucket Blvd Lowell, MA 01853 (O) 978-442-4822 (F) 978-442-4239 (M) 978-729-3040 (New) This e-mail, including any attachments, may be confidential, privileged or otherwise legally protected. It is intended only for the addressee. If you received this e-mail in error or from someone who was not authorized to send it to you, do not disseminate, copy or otherwise use this e-mail or its attachments. Please notify the sender immediately by reply e-mail and delete the e-mail from your system. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
