Francesco,
I saw in the troubleshooting section that a weak internal battery could
be the cause.
HA!!! Just found the procedure in the manual!!
Looks deceptively easy.....
Thanks,
Norm n3ykf
Francesco Ledda wrote:
You need to replace the internal battery (3.6) and calibrate the inputs; the
procedure is simple.
-----Original Message-----
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on
Behalf Of Norman J McSweyn
Sent: Friday, September 04, 2009 8:16 AM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] HP 5372a error 160
Hi all!!
Bid on and got an HP 5372a. Supposed to be tested, working. Powers up to
error 160 out of sensitivity calibration. Did download the svc man from
Agilent. Spent a few minutes looking through the manual. Not sure what
to make of it.
It's not obvious whether a complete cal needs to be done.
Questions, comments cheerfully received.
Will be on a boat trip for our holiday (US) from 10z Saturday until
Tuesday 10z or so.
Thanks,
Norm n3ykf
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
