Chuck, Sorry to hear you're closing down, after all these years. Drop me a line some time and we can talk.
Dave Carlson (formerly HP, then Agilent) ----- Original Message ----- From: <serv...@frequencystandards.com> To: <Time-nuts@febo.com> Sent: Tuesday, September 08, 2009 19:38 Subject: [time-nuts] HP 5061 chassis parts As some of you already know, I have closed down my frequency standards business. I am in the slow process of getting rid of things. My time is not my own right now. As of right now, I have a bunch of chassis parts I am going to start with. I have some a number of things for the HP 5061s. This includes unbroken side frames, handles, rack ears, plastic battery cases, aluminum battery holders, side panels, rear panels, most of the internal micon cables (not cut, just removed), and about anything else you can think of. I have a lot of modules but am not ready to sell them until I am able to test each of them. If you interested in any of the cabinet parts, let me know off line at serv...@frequencystandards.com. Please do not put in requests for other stuff at this time. I promise I will let the list know before anything goes onto Ebay. Chuck Norton _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.