PS this came from a Gould TC431 counter/timer, and pins 1-4 were connected, but pin 5 wasn't, So if anyone has a schematic for that counter/timer, then at least part of the story could be clarified.
Dave -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of David C. Partridge Sent: 18 September 2009 19:59 To: 'Discussion of precise time and frequency measurement' Subject: [time-nuts] Oscillator/OCXO Cathodeon FS59 I have in my sticky mitts a Cathodeon Oscillator Type FS59 51/01 10.0MHz. It might or might not be an OCXO. Anyone know anything about these? Five pins, the ones at the corners marked 1 through 4, the fifth one either unmarked or the stamp didn't register properly. There's a trimmer access hole on the top. Regards, David Partridge _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.