Nice part, up to 10GHz! probably well worth the >$3.50 If followed by a larger inductor/resistor, could probably be used to well below 50MHz. bye, Said In a message dated 10/9/2009 06:57:23 Pacific Daylight Time, ijcous...@verizon.net writes:
For a broad band, surface mount biasing inductor I use the Minicircuits TCCH-80. The pin 1 goes on the microstripline. The pin out has to be looked at carefully because the connections as viewed from the top and bottom do not connect straight through the multi layer ceramic base. John _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.