Chris Kuethe wrote:
> I removed the special-casing that would cause gpsd to activate the nmea(4)
> line discipline. The way I'm now doing this is to get ldattach to relay
> through a pty, and gpsd can read that pty. you can do something like this
> in /etc/rc.local: gpsd -n $(ldattach -t dcd nmea cua01)
I assume you also used the "-p" flag to ldattach, right?
I tried the following:
gpsd -n `ldattach -p -s 19200 -t dcd nmea /dev/tty00`
(my GPS is on /dev/tty00)
-- but about one second after ldattach did its setup, it died with the
following error in the logs:
eof during read from device: Undefined error: 0
and cgps never shows any data from the GPS.
Rich Wales
ri...@richw.org
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
