Hello John. Thanks, unit is remembering last setting, and has 9 memories; problem is not in memory or RAMS battery.
Regards. -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of J. Forster Sent: Monday, November 09, 2009 6:27 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Gigatronics 610 ROM Images. Just a thought: Does the unit remember the last used setting after a power cycle? If not, and the manual says it should, maybe it has a bad parameter RAM battery. That's a common problem with older instruments. FWIW, -John ============== > Hello guys. > May be this wrong mail list, but I ask my question and if anyone knows > right > mail list please lets me know. > > I have Gigatronics 610 (0.01-8GHz) sweeper with ROM v.4 and have problem > with HP emulation (this sweeper has HP commands set and responds as 08340 > for dedicated systems). > To enable HP commands set I must to send via GPIB command "HP", but after > recycling power I need to do this again, so this way is not good for > dedicated systems. > > May be someone have newer firmware version? > > Thanks, and Best Regards. > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.