Thanks Bjorn - I was afraid of that! TTFN,
Peter 2009/12/2 <b...@lysator.liu.se>: > SBAS (WAAS/EGNOS/etc) use L1 carrier frequency and "compatible" PRN codes, > but the datamessage goes at a higher rate (200bps (?)) than the normal GPS > which uses 50 bits per second. This means that most receiver will have > added dedicated/modified hardware for SBAS signals reception. > > -- > > Björn > >> Talking of which, I have been wondering if our beloved Thunderbolts >> could handle WAAS/EGNOS. I can't see any way to configure the current >> software - doubtless an upgrade would be required, but does the >> hardware have the capability? Does anybody have any thoughts? >> >> TTFN, >> >> Peter >> >> >> 2009/12/1 Magnus Danielson <mag...@rubidium.dyndns.org>: >>> David Pritchard wrote: >>>> >>>> Hi, >>>> >>>> I am trying to add DGPS capability to an older Rockwell Jupiter GPS >>>> module. I have a known good DGPS receiver and have tried to interface >>>> it to >>>> the Jupiter via Serial Port 2 (pin #15). So far, I have had no luck >>>> making >>>> it work. I'm wondering whether I need to "tell" the Jupiter that I have >>>> a >>>> DGPS unit attached, using the binary commands (which I have no clue how >>>> to >>>> do since I normally use the NMEA mode). Any help would be greatly >>>> appreciated. >>> >>> You should have this document in your hands anyway: >>> http://gpsd.berlios.de/vendor-docs/jupiter/MN002000A_JupiterReceiver_DesignerGuide_print.pdf >>> >>> Digital protocol, DGPS... well most things. >>> >>> Cheers, >>> Magnus >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >>> ______________________________________________________________________ >>> This email has been scanned by the MessageLabs Email Security System. >>> For more information please visit http://www.messagelabs.com/email >>> ______________________________________________________________________ >>> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.