Hello Bruce,
Yes, there are all sorts of pregnant packages and web sites that will solve
the problem in a jiffy. But LAPACK, for instance, is over 45 megabytes long.
What I am looking for is a targeted solution to the problem... a routine or
set of routines that I can drop into Lady Heather with a minimum of muss and
fuss that will spit out those two magic numbers.
The idea is to collect data for a while, press a key, and Heather will
characterize your oscillator. I have code in there that does this if you have
the active temperature control working (stabilize temperature to get osc drift
rate, slew temp to get osc tempco). I would like to be able to do it for the
more general case where the unit is not under temperature control.
---------------------
Try one of the Lapack derivatives such as clapack, Lapack++ etc
However you will need the optimised BLAS as well.
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141665/direct/01/
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
