Lady Heather version 3.0 flags holdover events in the plot with a red line at
the top of the plot. You can toggle the display from the G)raph menu.
If the holdover display is enabled, you can go to the start of the plot (HOME
key), place the mouse cursor in the plot area, and press %. The plot will
scroll to the next holdover (and/or time sequence skip) event each time you
press '%'.
If you have the active temperature control enabled, those temperature spikes
are also flagged as holdover events. The temperature control PID has code to
filter out the spikes (but they are left in the plot data where they can
generally wreak havoc on the temperature plot autoscaling)
-------------------------
The really LARGE jumps can and most likely are caused when the Tbolt
goes into and returns from holdover.
To verify if that is your cause, Look at the "Sat Counts" LH plot, if it
goes to zero, then that is what is happing.
_________________________________________________________________
Hotmail: Powerful Free email with security by Microsoft.
http://clk.atdmt.com/GBL/go/171222986/direct/01/
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
