Thanks, that works a lot better. Part of the bottom seems cut off, but I can live with that. The computer is an old 486 Compaq I use for radio Programming and as such, finding updates for the Video Drivers may be a problem !!
73, Dick, W1KSZ -----Original Message----- >From: John Miles <jmi...@pop.net> >Sent: Jan 12, 2010 1:37 PM >To: Discussion of precise time and frequency measurement <time-nuts@febo.com> >Subject: Re: [time-nuts] Lady Heather Software > >That normally means you're trying to run it at a fullscreen resolution your >video card/monitor doesn't support. Try the /vs /f combination to see if a >lower resolution will work? Otherwise, you may need to update the video >drivers on the machine. > >-- john, KE5FX > >> -----Original Message----- >> From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on >> Behalf Of Richard W. Solomon >> Sent: Tuesday, January 12, 2010 10:14 AM >> To: Discussion of precise time and frequency measurement >> Subject: Re: [time-nuts] Lady Heather Software >> >> >> I installed Lady Heather but when I try to get a full screen version >> I get two error messages and the program aborts: >> >> Set Display Mode Failed >> >> DirectDraw could not be initialized >> >> Any hints on what to try ? >> >> Putting a /f in the target line does not work. >> >> 73, Dick, W1KSZ >> >> >> >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > >_______________________________________________ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.