Agilent part FUSE-THERMAL 115C, part no. 10811-80008, $3.97 ea. as of
2 years ago.
I did have a 10811-60111 in a 5345A that had the thermistor open up
which blew the thermal fuse. The thermistor was interesting to replace.
73,
David N1HAC
At 09:08 PM 1/15/2010, you wrote:
Several months ago, I purchased new thermal fuses from HP. I can't remember
how I came up with the part number, probably out of a 5061B manual or
something, but when I searched Agilent parts, there it was. It was only $3
or $4 for the $0.10 part but it put it back in 'original' condition. As I
recalled, I found some very close values from one of the parts houses
(Allied, Mouser??) and got those as back ups.
If you need it, I can search for the details.
Joe
-----Original Message-----
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Tom Holmes, N8ZM
Sent: Friday, January 15, 2010 7:14 PM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] HP10811 losing EFC
While on the subject of 10811's, I have one which appears to have a blown
fuse. Bypassing same, it seems to work OK, so suspect that tiny filament or
whatever simply succumbed to some shock or vibration, or maybe just old age.
I don't recall the current draw now, but it seemed reasonable at the time,
and it came up on frequency and appeared to be controlling the oven temp OK.
Would like to replace the fuse with something more correct than a #22 before
I let it go online full time.
Any ideas for where to get replacement, or a suitable substitute?
Thanks. This is a fun list to monitor. I learn more in a day here than
anything else I've ever done.
Regards,
Tom Holmes, N8ZM
Tipp City, OH
EM79xx
-----Original Message-----
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Rick Karlquist
Sent: Friday, January 15, 2010 7:54 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] HP10811 losing EFC
No one has mentioned the fact that the cathode of the varactor is connected
to an internal 6.8V Zener diode voltage reference. This is another source of
trouble.
Rick Karlquist
N6RK
Bob Camp wrote:
> Hi
>
> I sure would do some quick continuity checks on the EFC line before I
> started swapping varicaps out. A bum solder joint opening up is a lot
> more likely than the varicap going nuts in a fashion that still lets
> the oscillator run.
>
> Bob
>
>
> On Jan 15, 2010, at 7:08 PM, Neville Michie wrote:
>
>> Hi,
>>
>> I have two HP10811 oscillators that do not respond to EFC voltage.
>> The latest to fail had been quite accurately set against a TBOLT, one
>> morning (after being on standby in a HP5328A) it was off frequency
>> and would not shift with EFC but would adjust with the coarse adjust.
>> I have bought in two Phillips varicap diodes, BBY40 and BB149A, but
>> before I did some damage fault finding in the HP10811s I thought it
>> wise to ask for any advice that was available. While I am playing
>> with them I may try to readjust the temperature setting
>> of the oven to get on top of the turnover. Can anyone point me to that
>> article?
>>
>> cheers, Neville Michie
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts@febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.