I use a 180x90 lab-table. It has a steel frame reaching out to the edges
and a sufficiently thick top covered with NordStat antistatic mat. I
experience no noticeable sagging, but then I arranged my instruments
such that I have two towers at the two back corners and a bookshelf
inbetween them onto which I have instruments in the middle. The
bookshelf seems to handle it fairly well. I am annoyed that I could not
get the shelf belonging to the table, as that would bring load off from
the instruments.
The main problem with this arrangement is that I have no wiring isle
behind the bench and in general too little bench area. Too much in one
place basically. I have a full-sized Schroff rack alongside the bench.
Still, I can get some usefull stuff done.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
