Hi But wouldn't cutting and splicing the wire void the warranty and possibly thus lead to the end of civilization as we know it....
Where is the AC to DC conversion done? In a lot of these it's in the base. Bob -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Poul-Henning Kamp Sent: Friday, January 29, 2010 12:07 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] [OT] Ikea Lamp In message <4b631407.9090...@pacific.net>, Brooke Clarke writes: >Hi Poul: > >Can the base be hung on a wall? >http://www.ikea.com/us/en/catalog/products/10128734 The base is a lump of metal But the swan-neck is just screwed into the base (some assembly :-) so if you are comfortable with cutting the wire and splicing it again, you can mount it on anything you can drill a 10mm hole in... -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 p...@freebsd.org | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.