Just pulling the 5370 out. I may replace the socket first with a good one. On your eprom. Do I just copy that into a standard 2764 and plug it in? Thanks
On Fri, Feb 5, 2010 at 2:06 PM, paul swed <paulsw...@gmail.com> wrote: > Thanks > > > On Fri, Feb 5, 2010 at 2:01 PM, Didier Juges <did...@cox.net> wrote: > >> I have two 5370As that had the bad socket syndrome. In my case, the entire >> instrument was erratic, not just the display, but if you unit(s) is using >> the same kind of cheap sockets as those in the 5370A, it is a possibility. >> >> Didier KO4BB >> >> ------------------------ Sent from my BlackBerry Wireless thingy while I >> do other things... >> >> -----Original Message----- >> From: paul swed <paulsw...@gmail.com> >> Date: Fri, 5 Feb 2010 13:40:12 >> To: Time-nuts<time-nuts@febo.com> >> Subject: [time-nuts] HP5370b when the eproms go >> >> I know that Didier has the eprom images for the 5370b. Thanks >> What has been the experience of the group when the eprom starts going? >> I have noticed recently that the counter will be working and then all of >> the >> sudden >> it locks up no display, but the other individual leds still work. Like >> trigger. >> Have not opened anything yet. But suspect this is the weekend project. >> Do the typical checks caps, voltages, etc. >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.