Clay, I would really like to have a copy of your test board for this effort. I'm sure it will be a challenging layout. But it could be a very handy piece of hardware. Supporting a PCA order would easy to do.
Pete Rawson On Feb 19, 2010, at 6:17 PM, life speed wrote: > If I can believe the simulation (a big if) the ADA4899-1 can provide 90 dB > isolation at 10 MHz, rolling up to 70 dB at 100 MHz, when configured with a > gain of +2 > > The subcircuit model provided by ADI is useless for noise, unfortunately. I > guess I'll have to build and measure, which I don't mind doing. Unless it > turns out to be a waste of time, and I should have just used the transistor > circuit. > > Clay > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
