I'm considering getting another batch of PCBs made up for the frequency divider design I sold a number of the other year.
The basic target is low jitter, 10MHz sine in, square wave outputs at 10MHz, 5MHz, 1MHz, and one other output that is switchable from 100kHz down to 1Hz. These are four layer boards, 5" by 3.5", and likely cost (based on a qty of 20) is about GBP20 each for the board with shipping extra. Note that the design uses mostly surface mount parts. I can't afford a speculative order as I'm not in work. So I'm asking for offline emails indicating "intent to purchase" to determine if this can fly. Obviously if there's enough interest I can order a larger quantity of boards which will bring the price down. Schematic on request (uses 74AC and 74HC logic), not a micro, CPLD, or FPGA in site. The new boards will have revisions so that no EC wires will be necessary. Regards, David Partridge _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.