Best source of info is : http://www.ko4bb.com/dokuwiki/doku.php?id=precision_timing:pictic
A simple time interval counter to connect at a PC serial port. Sort of a experimenter's way to understand how the instrument works without too much complexity. Stanley ----- Original Message ---- From: Richard W. Solomon <w1...@earthlink.net> To: Discussion of precise time and frequency measurement <time-nuts@febo.com> Sent: Fri, July 2, 2010 12:44:48 PM Subject: Re: [time-nuts] PICTIC II PCB order placed All this talk about the PICTIC has aroused my curiosity ... I missed the beginning of the thread, what is it for ? I may want on the wagon too !! 73, Dick, W1KSZ -----Original Message----- >From: Stanley Reynolds <stanley_reyno...@yahoo.com> >Sent: Jul 2, 2010 9:46 AM >To: Discussion of precise time and frequency measurement <time-nuts@febo.com> >Subject: [time-nuts] PICTIC II PCB order placed > >Oops, I didn't know this was on the list been getting a lot of off list stuff. > >Some of my own emails to the list get lost before they get to me, others are >delayed this is a on going problem probably a yahoo spam filter overload. > >UPDATE on order: > >I have placed the order for more boards than needed and hope to receive them >in >less than 2 weeks. > >As far as shipping think it will be easy for me if we call it 1 USD per board. >I > >will let everyone gage when they need to mail their US funds check/money >order. >If you are paying by paypal add 50 cents per board for a total of 9.50. No >need >for payment till I receive the boards unless you are unsure how long it will >take for me to receive it. > >Stanley Reynolds >225 Alpine Street >Birmingham, AL 35210 >USA > >If your software will only work with Irondale and not Birmingham this is OK > >Stanley Reynolds >225 Alpine Street >Irondale, AL 35210 >USA > >paypal stanley_reyno...@yahoo.com > > > > > > > >----- Original Message ---- >From: Bob Bownes <bow...@gmail.com> >To: Discussion of precise time and frequency measurement <time-nuts@febo.com> >Sent: Fri, July 2, 2010 10:45:36 AM >Subject: Re: [time-nuts] Pic programing for the PICTIC II > >Ok. I think there are a few of us who can/would program these up for >folks who need one. > > >On Fri, Jul 2, 2010 at 11:43 AM, Stanley Reynolds ><stanley_reyno...@yahoo.com> wrote: >> Thank you but I have all I want to do with the boards later I may change my >> mind. >> >> Stanley >> ><snip> > >_______________________________________________ >time-nuts mailing list -- time-nuts@febo.com >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.