> Hi John I have a manual dated 1989 for a later version Apelco ( DXL 6300) > The manual covers operation nicely, but the data for the Lessay chain is > incorrect. I can enter the GRI manually and the receiver locks nicely. I > have disassembled the eprom but cannot recognise the data areas to patch > the > right rates in, and associate them with the lat and long of the statons.
I had virtually no doc whatsoever. The unit I got working was from their test bench. It was a TD only model with front panel modified with extra push buttons for the Lat/Long version. I also got a few thousand of the unstuffed PC cards. At a guess, the GRI lookup tabvle would have been in the slave (Lat/Long) processor's ROM. In those days, I did not have a logic state analyzer, so know nothing more about the SW. I > have tried the obvious paths but had no help the UK dealer ceased trading > and filed earlier in the year. Their engineer did try to help but could > not > find information. Are you aware of any source of information on their > products and updates?? No. My only Raytheon contact died about 3 years ago. :((. > I am in the process of turning this into a 10MHz locked source, (a couple > of > internal links) as it is not really too useful for Nav but it would be > nice > to get it working properly. Particularly as we look like having one of the > last operational chains in Western Europe. > > Alan G3NYK Sorry, I have little more to offer on this, Best, -John ============== _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
