Hi Does that save it to eeprom?
I'm happy with the result of the survey, so a single command to save it may be all that's needed. Bob On Aug 1, 2010, at 5:46 PM, Brian Kirby wrote: > Have you tried entering the position data manually ? > > GPS:POS N,DD,MM,SS,W,DD,MM,SS,ALT > > altitude in meters > > On 8/1/2010 2:04 PM, Bob Camp wrote: >> Hi >> >> What's the current thinking on saving the survey position on a z3805? Each >> time mine power cycle they come back believing they are in Korea somewhere. >> >> Is there a simple "do these three things" recipe to get it saved to eeprom? >> >> It's not a real big deal since they take quite a while to stabilize and >> really run right. It's more of a nuisance issue. I'd hate to nuke the unit >> fixing a minor problem. >> >> I'm sure if I dug long enough in the archives I could get close to an >> answer, but hey, I'm lazy .... >> >> Bob >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
