Yes, I can but it will be toward the end of the week before I can ship them as they are in a different location. I'm still shipping boards as they are with me. If anyone wants the chips please email me off list or paypal me at stanley_reyno...@yahoo.com . I also have all the other parts but will keep shipping boards as my first priority. I have some 10Mhz 20PPM osc and a 80Mhz 100PPM osc. The 80Mhz I think they would be good for calibration of interlopers but not measuring. I can program the Pic chips and test them in my board.
Do not expect parts orders to be filled fast till I see what demand is like. I would like to remind everyone that this design was a free gift to time nuts by Richard McCorkle. My only connection is to provide the boards at low cost, some emails to me indicate some confusion that I'm more connected than I am. Others on the list have provided help with the boards and advice to me on my projects so I will try to help all complete this project. Stanley ________________________________ From: Heathkid <heath...@heathkid.com> To: Discussion of precise time and frequency measurement <time-nuts@febo.com> Sent: Mon, August 2, 2010 1:03:19 AM Subject: Re: [time-nuts] 74AC175PC Stanley, Would you be willing to do another "group buy"? I'll send you enough $ for 10 of them via PayPal before you buy and I know others are already willing to buy more. I just can't logistically do a group buy myself right now but would be willing to help pay for your time and efforts. I know what they are in quantities of 50. I'll pay $2 each. That should make it worth while... with fees, etc... I'll send you $25 for 10 of them. Will you do this? 73 Brice KA8MAV ----- Original Message ----- From: "Stanley Reynolds" <stanley_reyno...@yahoo.com> To: "Discussion of precise time and frequency measurement" <time-nuts@febo.com> Sent: Sunday, August 01, 2010 8:13 PM Subject: Re: [time-nuts] 74AC175PC I have had good luck with Quest they are showing stock. www.questcomp.com They do have a $25 min. Stanley ----- Original Message ---- From: Bob Camp <li...@rtty.us> To: Discussion of precise time and frequency measurement <time-nuts@febo.com> Sent: Sun, August 1, 2010 4:20:44 PM Subject: Re: [time-nuts] 74AC175PC Hi At least at this point the surplus dealer has been checked out by others buying the parts from him. You might find there's enough interest to make another buy worthwhile. Bob On Aug 1, 2010, at 4:59 PM, Heathkid wrote: > Hello. Does anyone have any of these left? I've checked with a couple of the > guys that did a group buy but they are out of them. I'd prefer not to do SMT > and don't really want to buy 50+ from an unknown surplus seller. > > I need six (6) - or at least one or whatever someone has to get me started. > > Thanks! > > 73 Brice KA8MAV > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
