You do not need a switch, the T-Bolt Monitor only reads what's coming from the T-Bolt, you just need to wire two connectors in parallel, and as long as Lady Heather uses the same T-SIP protocol, which I believe is the case, you should be OK.
Didier KO4BB ------Original Message------ From: Dr. Frank Stellmach Sender: time-nuts-boun...@febo.com To: Time-Nuts ReplyTo: Time-Nuts Subject: [time-nuts] LCD monitor for TBolt Sent: Aug 7, 2010 2:34 AM Dick, I also ordered an LCD monitor from fluke.l (beneath an LPRO Rubidium). For Lady Heather, do I have to add a switch between the monitor and the PC, or does the monitor have an additional RS232 port to feed through the PC communication automatically? Frank _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. ------------------------ Sent from my BlackBerry Wireless thingy while I do other things... _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.