On Wed, Aug 11, 2010 at 11:11 PM, Dick Moore <rich...@hughes.net> wrote: > I have a board layout that I need made, simple single-side, 2.3 x 6.5 inches. > Any suggestions on where I can get this made at a reasonable price? The mask > layout I have is a printout from a pdf document that has black where the > traces are and is full-size. >
www.barebonespcb.com is high quality, fast and cheap. Many board houses offer a similar service. The caveat is that they all expect Gerber files rather than PDF. You might be able to call and see if they can take PDF as a special case. Otherwise try to dig up the CAD files that were used to create the PDF, or recreate the layout in Eagle, gEDA, PCB Artist etc and export as Gerber. Or skip the professional board houses and find someone with an etch tank who can help. Henry Hallam _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.