The original screws are about 15.5 mm long and are threaded on the first 6 mm approx. The shank is thinner the rest of the way, approx. 3mm, so you can undo those screws and not loose them. I beleive they are called "captive screws". If your base is threaded for M4, you may want to drill the holes out to 4 mm to eliminate the threads. -- FL
--- Den ons 18/8/10 skrev k6...@comcast.net <k6...@comcast.net>: Fra: k6...@comcast.net <k6...@comcast.net> Emne: [time-nuts] Mounting hardware for HP/Symmetricom 58532A GPS antenna? Til: time-nuts@febo.com Dato: onsdag 18. august 2010 12.22 Just received my well used 58532A GPS antenna; the pipe mount arrived yesterday. I've looked at available documentation on the WWWeb and haven't found an answer -- what size hardware do you use for the antenna? I know that the answer is NOT 10-32! That's what's on the pipe mount, and those are too big. Is this thing metric? I don't have access to a lot of hardware right now to check. If it's possibly metric, I'm better off going to a different hardware store than if it's American sizes. Many thanks! K6RTM Bob in Silicon Valley _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
