Hope this makes it through from my phone... - Chad.
On Sep 22, 2010, at 9:09, "Bob Camp" <li...@rtty.us> wrote: > Hi > > The 3.0 firmware is one way to make sure you don't get one of the "early" > ocxo's. The later designs certainly worked better. > > I haven't seen any of the original red label ocxo's show up for quite a > while, so they all may be gone by now. > > Bob > > -----Original Message----- > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On > Behalf Of Mark Sims > Sent: Wednesday, September 22, 2010 12:03 PM > To: time-nuts@febo.com > Subject: [time-nuts] Looking for good, cheap, external reference > > > I don't think the firmware on the Tbolt makes much difference in > performance. (The older firmware even has a couple more features in it). > > Units with the 3.0 firmware are newer and have a much greater chance of > having the poor temperature sensor which definitely has a bad effect on > performance. If I had my choice of two units (both with the good > oscillator) I'd definitely pick the older one. > > --------------------------------------- > -There are several cheaper ones for sale but make sure you get the 3.0 > firmware > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.