Actually building a loran recvr is not that hard if its only purpose is timing/frequency. I lived in Michigan at the time and used the great lakes chain. You only had to pick the strongest single station. So essentially a simple front end and filters a bit like wwvb but much broader band. No special xtal filters. There was a professor Ralph Burhans (Deceased now) from Ohio State that published several very good articles. The hardest part was building an all cmos GRI chain and then sampling detector..... amplification and such for locking the xtal oscillator. It worked really well compared to the back then very weak wwvb signal in Mi. I used that rcvr in Mi and CT. for 10-15 years. Then about 2000 there was a loran is dead scare and the austron 2100s showed up at Hamfests. I hit the jackpot 2 of them for $50. Both worked and mint condition. Well needless to say the old home brew went away.
Liked the austrons so well, stumbled into a 2000c 5years ago and got it cooking. Now thats a real loran timing recvr. Lots of fiddling to make it work. Not for the faint of heart. The 2100s are essentially several button pushes and you are in business. With the end of loran c hated to trash them so designed the very simple few common ICs like 3 or 4 loran c simulator (design is free and on the net Index of /simloran <http://n4iqt.com/simloran/>) to at least allow all of them to act as very nice phase comparators. Regards Paul. On Wed, Oct 6, 2010 at 9:09 PM, Perry Sandeen <sandee...@yahoo.com> wrote: > Gents, > > Wrote: Its not just diurnal shift it plain old jumps anytime. Have been > monitoring for periods from the east coast using both a Tracor 577 and 2 X > HP vlf117 rcvrs. All kinds of stuff occur. > > Reply: That’s fine equipment that you have. What I don’t know but have to > find out if the newer semi-conductors would make a better receiver. Trash > factor acknowledged. > > Wrote: I like you want a second source but will say I was spoiled by > loran. Maybe I did not realize how much. Even though my first loran timing > recvr was homebrew in about 1989 as I recall. > > Reply: I’m very impressed that you could make a homebrew Loran receiver > > Wrote: How far are you from wwvb?? > > Reply: I’m 1274 Miles according to Yahoo maps. By the crow flying > probably 1100 miles. I live in Manchester, TN. According to the NIST map > I’m in the middle of the 100 micro-volt per meter zone, so I’m probably > better than that but I don’t know by how much better yet. > > Regards, > > Perrier > > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.