http://www.spectradynamics.com/HPDA-15.html
http://www.spectradynamics.com/DA-100.html
http://www.quartzlock.com/products.asp?mainCat=3&subCat=19&product=24
<http://www.quartzlock.com/products.asp?mainCat=3&subCat=19&product=24>
http://www.quartzlock.com/products.asp?product=21&subCat=18&mainCat=3
<http://www.quartzlock.com/products.asp?product=21&subCat=18&mainCat=3>
Or roll your own.
If one eschews MMICS and opamps and uses inexpensive BJTs achieving a
phase noise comparable to or lower than that of the above isnt too
difficult.
Bruce
dave powis wrote:
Hi Murray,
I have one you may also like to look at as part of your considerations -
http://g4hup.com/DA/DA.htm
Regards,
Dave
________________________________
From: Murray Greenman<murray.green...@rakon.com>
To: time-nuts@febo.com
Sent: Tuesday, 26 October, 2010 2:01:32
Subject: [time-nuts] Distribution Amp suggestions
Hi,
We have more expensive distribution amps around the production facility
here at RAKON than I'd care to count, and always seem to need more. I am
looking for additional units as the requirements expand, something like
the Symmetricom 4036B which we already use. Our need is for 10MHz
distribution.
Since we need to purchase several of these, can anyone suggest a unit
with similar performance and quality that would be lower cost than the
Symmetricom 4036B?
Regards,
Murray Greenman
RAKON Ltd
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
