Matt, As a follow up just ran across this which is good to get started with : http://www.wriley.com/Examples%20of%201%20PPS%20Clock%20Measuring%20Systems.pdf
In fact Mr. Riley has a very good selection of material at : http://www.wriley.com/#papers Stanley ----- Original Message ---- From: Matt Davis <mattdav...@gmail.com> To: time-nuts@febo.com Sent: Mon, November 15, 2010 7:31:42 AM Subject: [time-nuts] Getting Started in High Precision Timing Hello all, I have been a software hacker for years but have never really done too much hardware hacking. I have been looking at oxco modules, but the data sheets of various vendors do not really provide me with a good basis as to what such an oscillator would provide me. I assume its just oscillation given the given frequency. Do any of you all have any good links/resources aside from what a basic google would provide, as to how to get the data from the oscillator at a pulse-per-second rate allowing me to do some basic timing. Really, I'm just looking for some first steps in hacking on these high-precision oscillators. Thanks -Matt _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.