Out of curiosity, how many other time-nuts are here in Oregon
( besides me, and apparantly pete)
Sent from my Banana Jr. mobile device
On Nov 19, 2010, at 3:15 PM, Magnus Danielson <mag...@rubidium.dyndns.org
> wrote:
On 19/11/10 18:13, Pete Lancashire wrote:
Thanks everyone. The question came up in what I am being charged
for shipping
From Texas to Oregon, $140 UPS Ground. Not complaining since I got
the thing
for $53. Hopefully will be FIP.
-pete
PS Thanks also on the battery issue. Next to get a real service
manual.
I've done most of the things I need with what's on the net.
Replacement of the battery was trivial. Finding out that it was the
root cause was a bit less than obvious. The input sensitivity
calibration always goes flat-line, being a huge factor of annoying
you, as you would need to trim it up on each power-up. It's done
with menues and no service-mode required. Replacing the battery is a
matter of finding a 3,6V Lithium battery and do some soldering. Then
after power-up do the input calibration and you are all set for the
next 20 years or so. It is worth the effort and not hard at all.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.