You need to clean the elastomer. I've done this with Caig deoxit, though
I would search their website to see if they have a special product for
the task.
http://store.caig.com/
Generally the LCD is just pressed against the elastomer, so you may need
to see that the pressure is sufficient.
On 1/3/2011 12:34 PM, Jim Palfreyman wrote:
Apologies for being a teensy tiny bit OT. But is relevant on the whole.
I have a remote control for an air conditioner whos display is only
partially working.
Upon internal inspection it seems the sticky thingy (technical term)
connecting the LCD display to the board is not attached properly.
Any hints on how to reattach these?
Jim Palfreyman
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
