Arthur I have the both, the screwdriver adjust only will probably make a good offset for the Dual Mixer. I just checked one, it tunes 3 Hz down and 1.5 Hz up In a message dated 2/1/2011 9:39:08 A.M. Eastern Standard Time, golgarfrinc...@yahoo.com writes:
"Does any one have information on the Austron 1150 oscillator?" I have seen 2 different variations of this oscillator. There is one that was used in the 1210D standard that has a BNC connector besides the 9-pin connector and this unit has EFC input on the 9-pin connector. The second does not have the BNC connector and also does not have any EFC capability, just a screw adjustment. The specs may differ as well but both are pretty good oscillators. -Arthur _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.