Hi I have never seen any register level info on them. It may be out there.
Bob -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Poul-Henning Kamp Sent: Monday, March 07, 2011 8:11 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Where does the VXI E1740A fit in ? In message <298e3f36-5846-4814-ba22-3e9c520e3...@rtty.us>, Bob Camp writes: >Hi > >They are very cool devices - when you get them working. Without the custom Windows software, they make a nice piece of wall art. A lot of them are mated up with non-HP VXI PC's so getting them running can take you off in multiple directions. Timing wise, they will do all of the standard stuff (AVAR, MTIE, TDEV etc) at 5370(?) type resolution. Is there any register-level programming information for them ? If so, putting an open source UNIX on the VXI PC should be possible... -- Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 p...@freebsd.org | TCP/IP since RFC 956 FreeBSD committer | BSD since 4.3-tahoe Never attribute to malice what can adequately be explained by incompetence. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.