Hi Dick, To get through windows without drilling och sawing, I found a very flat "flex-cable", that you can close your window over.
http://www.kjell.com/content/media/images/items/30161.jpg It is probably mostly for people wanting to get a cable through to a sat dish or outside TV antenna in apartment buildings. It is probably 75ohm and has F-connectors, but for say a T-bolt you already have a 75ohm F at the receiver. -- Björn > Thanks all -- I got a Lucent bullet from i.fluke, +26dB gain. Replaces a > Hawk patch with lower gain, but I want to run more cable (about 2X) to get > the bullet higher in the air. The Hawk patch, which works very well > signal-wise, has cable that's about 3 or 4mm in diameter and about 6m > long. I've sawed out a part of a plastic window frame to get the cable > inside. So I don't want any cable that's bigger than 0.25" d. and > preferably smaller. Hope this clarification helps a bit. > > Best, > Dick > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.